PRODUCT

Garmy Advanced Material co.,Ltd specializes in Anti-vibration materials and
watertight materials for automobiles and electronic components.

Waterproof Butyl Adhesive Tape

Nonflammable Waterproof Butyl Adhesive Tape
Nonflammable Waterproof Butyl Adhesive Tape
Flame Retarding Waterproof Butyl Adhesive Tape
Flame Retarding Waterproof Butyl Adhesive Tape
Applied
Applied
After application
After application

Before the installation of the waterproof butyl adhesive tape

  • Oil or foreign substances on the surface of the attaching material must be removed cleanly
  • When the attaching material is damp or wet, foreign substances must be removed and heaving state must be checked to rub evenly for adhesion
  • When attaching to the damp surface, the adhesive power is shown after 30 minutes ~ 1 hour from adhesion according to the dampness, so the glue must not be removed after the adhesion

Basic information of the waterproof butyl adhesive tape material

Title
Contents
Used materialsFlame retardant butyl rubber, silver foil glass cloth fabric and flame retardant fabric, etc.
Product NameNonflammable waterproof butyl adhesive tape, Flame retarding waterproof butyl adhesive tape
UsageNo limitation in attaching material (Wood, metal, plastic, concrete and pipe, etc.), for prevention of leakage and flowing in construction, various joints in cracks, for wall fixing, prefabricated panel joints, automobiles, LPG carrier and ship residential zone and engine room, and others
Installation ConditionIn high and low temperature, all four seasons for internal and external use (all-weather), humid and moist state, on fresh water, seawater and underwater
Manufacturing SizeRefer to appendix (various sizes can be manufactured)
FeaturesPowerful adhesive power is shown even in damp state and cannot be removed after adhesion. In addition, the adhesiveness is semi-permanent, and is nonflammable and flame-retardant

Waterproof butyl adhesive tape performance and installation

1) Performance in damp state

2) Performance taping in oil state

Basic test on waterproof butyl adhesive tape

Water resistance test

A hole is cut in the middle of the pipe, and butyl tape is used to block the hole while the water is flowing out to observe any leakage

→ No leakage

Fresh Water Test

Fresh water is filled in the container to check the adhesiveness on attaching the butyl tape inside the seawater

→ No abnormal adhesiveness

Concrete Adhesion Weatherproof Test

Weatherproof test in rain or according to the change in temperature after attaching the butyl tape on the concrete surface

→ No abnormal adhesiveness

Seawater Test

Seawater is filled inside the container to check the adhesiveness when attaching the butyl tape inside the seawater

→ No abnormal adhesiveness

Nonflammable State Test

→ No abnormality

Address : 22-16 Oseonsandan-ro, Geumwang-eup, Eumseong-gun, Chungbuk, Korea (565, Oseon-ri)
Tel : +82-43-750-7556   |   Fax : +82-43-750-7558   |   E-mail : garmya@hanmail.net
Copyright©Garmy Advanced Material Co.,Ltd. All rights reserved.